Mineral
Pro-Chemicals
Polymers
Chemicals
Bitumen
Slack Wax
Petroleum Jelly
Paraffin Wax
Liquid Paraffin
Methyl Acetate
Methyl acetate is a clear, colorless liquid with a common ester odor similar to nail polish removers and adhesives. The flash point of Methyl acetate is -10 degrees Celsius and its degree of flammability is very high. The solubility of methyl acetate in water at room temperature is 25%, and its solubility in water increases with increasing temperature. Methyl acetate is not stable in the presence of strong aqueous bases or aqueous acids.
Micro Crystalline Wax
This type of paraffin wax is Micro crystalline Wax Which facility to supply pure micro crystalline wax or in combination with paraffin or other performance additives..
Derived from the dew axing of base oil in the refinery process, micro crystalline waxes are made up of saturated hydrocarbons possessing a fine-grained crystal structure which renders them much more flexible than paraffin waxes. Colors available range from white through yellow to dark brown in appearance. Our products are producing by full QC supervision according to ASTM standard and will be guaranteed by Faragam Petro Tech Company.
Microsilica
Microsilica is a super-pozzolan that, if applied correctly, has a very significant effect on the strength and durability of concrete devices. Microsilica in concrete heating is largely due to the same mechanisms that increase the durability and strength of concrete, in fact, the filling properties and pososolan reaction of microsilica can reduce the heat build up of concrete. The heating of one gram of microsilica is more than one gram of normal Portland cement, and in some cases more than twice that. But higher resistivity of microsilica (2 to 4 times the cement) allows reducing the total amount of concrete materials to achieve a certain resistance, and thus using microsilica can reduce the heat-generating properties of concrete. Microsilica is an ancillary product of the glass manufacturing process. Due to its unique properties, Microsilica today has a great place in concrete production. The use of microsilica powder, especially in coastal areas or areas where concrete requires special protection against corrosion, is expanding.
Normal Paraffin
Normal Paraffin is the major raw material for the manufacture of LAB. Normal Paraffin is extracted from kerosene which contains an average of 20/25% paraffin and therefore is generally produced close to a refinery as the kerosene, free of the paraffin removed has to be returned to the refinery. Over 80% of Normal Paraffin is used for production of LAB the remaining N-Paraffin may be further processed to obtain special solvents used for various industrial applications including synthetic resins, paints and varnishes, degreasing agents and printing inks. Normal paraffin operate as a dissolver in industrial for producing polymers and resins, colors, artistic coverings and grease polisher.
Oxidized Bitumen 115/15
Oxidized bitumen 115/15 is also known as oxidized asphalt 115/15, which is produced from petroleum bitumen during the heating and aeration process. Oxidized bitumen 115/15 is very important because it has a high flash point, high softening point and also high stability during melting.
Oxidized Bitumen 85/25
Oxidized Bitumen 85/25 is a semi-solid oxidized grade of pure petroleum bitumen that is classified into polycyclic aromatic hydrocarbons and is commonly used for various purposes in construction work. Oxidized bitumen is 25/85 based on petroleum bitumen, which is made by blowing 60/70 bitumen with very hot air. This product, which is used in the industrial sector, has “solid” properties, mainly at ambient temperature, and provides excellent adhesive and waterproof quality when using hot and cold oxidized bitumen.
Paraffin emulsion
Persia paraffin emulsions are nonionic, cationic and anionic emulsions for food grade and technical application and are based on a variety of materials like LDPE and HDPE waxes, primary PE waxes, PP waxes, paraffin waxes, micro crystalline waxes, carnauba waxes and blends thereof. These products are used for applications like cold end treatment of glass, glass fiber sizing, citrus fruit coating or mould release agents. . Our products are producing by full QC supervision according to ASTM standard and will be guaranteed by Faragam Petro Tech Company.
Paraffin wax 0.5%, 56-58°C M.P
Paraffin wax 0.5%, identifying by fully refined paraffin wax category and so called crystal paraffin wax in the market, also. The main ingredient of, paraffin wax 0.5% is light slack wax and the final product will be taken by sweetening method. Paraffin wax 0.5% oil, is transparent, white, too hard, non-odor. Our products are producing by full QC supervision according to ASTM standard and will be guaranteed by Faragam Petro Tech Company.
Paraffin Wax 0.5%, 58-60°C, M.P
Paraffin wax 0.5%, identifying by fully refined paraffin wax category and so called crystal paraffin wax in the market, also. The main ingredient of, paraffin wax 0.5% is heavy slack wax and the final product will be taken by sweetening method. Paraffin wax 0.5% oil, is transparent, white, too hard, non-odor. Our products are producing by full QC supervision according to ASTM standard and will be guaranteed by Faragam Petro Tech Company.
Paraffin Wax 1-1.5%
Paraffin wax 1-1.5%, identifying by semi refined paraffin wax category. The main ingredient of, 1-1.5% semi refined paraffin wax is light or heavy slack wax. Heavy or light slack waxes as raw material have impression on melting point of semi refined paraffin wax 1-1.5%, between 58 to 65°C. This differences allow to the customers to choose inquired paraffin wax 1-1.5% according to its own country temperature and location. The heavy one often used in nearest countries to the equator. Paraffin wax 1-1.5% oil, is transparent, white, too hard, non-odor. Our products are producing by full QC supervision according to ASTM standard and will be guaranteed by Faragam Petro Tech Company.
Paraffin Wax 1-3%
This type of paraffin wax, identifying by semi refined paraffin wax category. The main ingredient of, 1-3% semi refined paraffin wax is light or heavy slack wax. Heavy slack wax or light slack wax as raw material have impression on melting point of semi refined paraffin wax 1-3%, between 58 to 68°C. This differences allow to the customers to choose inquired paraffin wax according to its own country temperature and location. The heavy one often used in nearest countries to the equator. Paraffin wax 1-3% oil, is transparent, white, too hard, non-odor. Our products are producing by full QC supervision according to ASTM standard and will be guaranteed by Faragam Petro Tech Company.
